|
Cost-effective Edge Network Connection Solution
The FGSW-2620CS provides 24 Fast Ethernet ports and 2 Gigabit Ethernet ports and offers wire-speed packet transfer performance without risks of packet loss. It is equipped with non-blocking 8.8Gbps backplane; greatly simplifies the tasks of upgrading your LAN for catering to increasing bandwidth demands. The high data throughput makes the FGSW-2620CS ideal for most Gigabit environments, especially upgrading network to a Gigabit environment.
Advanced and Friendly Web-Based Management
For efficient management, the FGSW-2620CS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, Port-Based / IEEE 802.1Q / MTU VLAN, port mirroring, port trunk, QoS, bandwidth control, broadcast storm control, STP, RSTP, configuration backup/recovery, MAC address / TCP & UDP filter and IGMP Snooping v1/v2.
The FGSW-2620CS provides Port-Based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allowed on the FGSW-2620CS will be maximally up to 26 for port based or up to 32 for IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group and only can access the public port 25 / 26 or port 26. Via supporting port trunking, the FGSW-2620CS allows the operation of a high-speed trunk combining multiple ports. The FGSW-2620CS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk and 1 group of 2-Port 10/100/1000Mbps trunk support with up to 2000Mbps bandwidth per trunk, and supports fail-over as well.
Easy Long Distance Installation
The FGSW-2620CS is equipped with the MDI/MDI-X auto detection for easy plug and play connection, regardless of cabling types in straight through or crossover. In addition, with its Auto-Negotiation capability, all the RJ-45/UTP ports of the FGSW-2620CS can be configured to speeds of 10/20Mbps / 100/200Mbps (Fast Ethernet) and 1000/2000Mbps (Gigabit Ethernet) automatically.
The two Gigabit combo ports of the FGSW-2620CS can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Form Factor Pluggable) interfaces. The distance can be extended from 100 meters (TP), 550 meters (Multi-mode fiber), up to above 10/20/30/40/50/70/120 kilometers (Single-mode fiber).
Hardware Specification
- Hardware Version: Version 2
- 10/100Mbps Copper Ports: 24 x 10/100Base-TX RJ-45 Auto-MDI/MDI-X interfaces
- 1000Mbps Copper Ports: 2 x 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
- SFP / mini-GBIC Slots: 2 x 1000Base-SX/LX/BX SFP slots, shared with Port-25 and Port-26
- Switch Processing: Scheme Store-and-Forward
- Switch Fabric: 8.8Gbps
- Switch Throughput: 6.547Mpps@64Bytes
- Address Table: 4K entries
- Share Data: Buffer 2.75Mb embedded memory for packet buffers
- Flow Control
- Back pressure for half duplex
- IEEE 802.3x Pause Frame for full duplex
- Dimension: (W x D x H) 440 x 120 x 44 mm (1U height)
- LED
- Power
- LNK / ACT (Green)
- 100/1000 (Green)
- Reset Button
- < 5 sec: System reboot
- > 10 sec: Factory Default
- Weight: 1.61 kg
- Power Requirement: 100~240V AC, 50-60 Hz, 0.5A
- Power Consumption / Dissipation: 19.6 Watts / 66.9BTU
Smart Function
- System Configuration: Web interface, SNMP v1
- Port Configuration:
- Port speed duplex mode selection
- Flow control: disable / enable
- Port disable / enable
- Port description on each port
- Bandwidth Control: 1 / 2 / 4 / 8 / 16 / 32 / 64Mbps
- Broadcast Storm: Control 5% / 10% / 25% / 50% / Disable
- Port Statistics: Display detail Ethernet traffic counter information on each port
- VLAN
- - 32 IEEE 802.1Q VLAN groups
- - 26 Port-Based VLAN groups
- - MTU VLAN
- Spanning Tree Protocol
- - STP, IEEE 802.1D (Spanning Tree Protocol)
- - RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
- Link Aggregation
- - 2 groups of 4-Port 10/100Base-TX trunk support, up to 800Mbps bandwidth per trunk
- - 1 group of 2-Port 10/100/1000Mbps trunk support, up to 2000Mbps bandwidth per trunk
- Port Mirroring : Port mirroring allows monitoring of the traffic across any port in real time
- QoS
- Allows to assign low / high priority on each port
- First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
- Security
- MAC Address
- TCP & UDP Filter
- IGMP Snooping: v1 / v2 Allows to disable or enable
| 
