|
3rd Generation of PLANET Desktop Web Smart Gigabit Switch
The GSD-800S is an 8-Port 10/100/1000Mbps Web Smart Gigabit Ethernet switch, utilizing a compact form factor which can be mounted in a 10/19-inch rack with optional rack-mounting kits, or placed on desktop. Compared with previous version, the enhanced software features as below:
- 802.1Q VLAN
- Rapid Spanning Tree
- IGMP Snooping
- 802.1X Authentication / RADIUS
- SNMP monitor and SNMP Trap
High Gigabit Performance / Wire-Speed Switching
With 16Gbps non-blocking switch fabric, 8k MAC Address table and 802.3x Full-Duplex flow control, the GSD-800S offers wire-speed packet transfer performance without risk of packet loss.
Friendly / Simple Web Management Interface
For efficient management, with its built-in Web-based management, the GSD-800S offers an easy-to-use and configuration facility. Via the WEB interface the GSD-800S can be programmed for basic Switch management functions such as per port speed duplex settings, Port Trunking, VLAN, Port Mirroring, Rapid Spanning Tree, 802.1X network security authentication and Misc Configuration. Additionally, the firmware includes advanced features such as IGMP snooping, QoS (Quality of Service), broadcast storm and bandwidth control, to enhance bandwidth utilization.
Remote and Centralize Management installation
Affording the current network to grow and expand, the GSD-800S supports standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software. These features provide a cost-effective way to manage the devices from the Internet whenever you are at work or at home.
Easy Cabling installation
All eight RJ-45 copper interfaces support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. The MDI/MDI-X auto detection supports wired connection to any Ethernet device without requiring cross-over cables.
Hardware Specification
- Copper: Ports 8 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
- SFP/mini-GBIC Slots: N/A
- Switch Architecture: Store-and-forward
- Switch Fabric: 16Gbps / non-blocking
- Switch Throughput: 11.9Mpps
- Address: Table 8K MAC address table with Auto learning function
- Share Data Buffer: 176K bytes on chip
- Flow Control: Back pressure for Half-Duplex, IEEE 802.3x Pause Frame for Full-Duplex
- Jumbo Frame: 9K Bytes
- LED Power: 1000 Link/Act, 100/10 Link/Act per port
- Dimensions (W x D x H): 217 x 135 x 43.5 mm
- Weight: 1.1kg
- Power Requirement: 100 - 240VAC, 50 – 60Hz, Auto-sensing
- Power Consumption: 8.7 watts / 27.31 BTU
- Operating Temperature: 0~50 Degree C
- Operating Humidity: 5~95%(non-condensing)
Layer 2 Function
- Management Interface: Web Browser, SNMPv1, v2c monitor and SNMP Trap
- Port Configuration - Port disable/enable. Auto-negotiation 10/100/1000Mbps full and half duplex mode selection.
- - Flow Control disable / enable.
- VLAN Port-Based / 802.1Q Tagged Based VLAN
- Up to 64 VLAN groups
- Link Aggregation Supports 4 groups of 8-Port trunk
- IEEE 802.3ad LACP
- QoS Traffic classification based on 802.1p priority, DSCP field in IP Packet
- IGMP Snooping IGMP (v1/v2) Snooping, up to 64 multicast Groups
- SNMP MIBs RFC-1213 MIB-2
- RFC-1573-Interface MIB
- RFC-2819 RMON MIB (Group 1)
Standards Conformance
- Regulation Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab Gigabit 1000-T
- IEEE 802.3x Flow Control
- IEEE 802.3ad Port trunk with LACP
- IEEE 802.1d Spanning tree protocol
- IEEE 802.1w Rapid spanning tree protocol
- IEEE 802.1p Class of service
- IEEE 802.1Q VLAN Tagging
- IEEE 802.1x Port Authentication Network Control
- Network Media
-
10Base UTP / STP category 3, 4 or 5 cable
-
100Base-TX – UTP / STP category 5 cable
-
1000Base-T – UTP / STP category 5e / 6 cable
| 
