Fusion Splicer: KL-300T

Features

•  Core to core alignment by PAS technology PAS:Profile Alignment System)
•  Fiber core can be display clearly
•  SingleX or Y view and X & Y view simultaneously
•  Auto detect cleaved endface fault
•  Display fiber cleaved and offset angle
•  Display core and clad offset
•  5.6 inch TFT color LCD monitor with clear digital image display
•  USB & VGA interface
•  Software upgrade via USB interface

Specefications

• Model: KL-300T
• Applicable fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
• Fiber cleaved length: 8~16mm（Coating diameter：250µm), 16mm（Coating diameter: 250 ~ 1000µm）
• Fiber diameter: Cladding diameter：80 ~150µm, Coating diameter：100~ 1000μm
• Fiber Count: Single
• Fiber aligning method: Core or clad aligning
• Image processing method: Digital
• Actual average splice loss: 0.02dB (SM）,0.01dB (MM),0.04dB (DS),0.04dB( NZDS)
• Splicing time:  Typical 9 sec，with standard SM fiber
• Splicing mode: 53(templet), 40(user)
• Splice loss estimate:  More accurate
• Return loss: ＞60dB
• Storage of splice result: 4000 results，20 parameter per result
• Fiber display and magnification: 300X（X or Y view）,150X（X and Y view）
• Tube heating time: Typical 30 sec
• Tube heating mode: 9(templet), 24(user)
• Tube heating temperature : Can be adjusted
• Applicable Protection sleeve length: 60mm, 40mm and a series of micro sleeves
• Tension test: 2N
• Electrode life: 2500
• No.of splice/heating with battery: Typical 150 cycles (splice/tube heat) with inner Li-battery
• Display screen: 5.6 TFT inch color LCD monitor
• Image change over: The fiber image is turned upside down
• Terminals: USB 1.1 and VGA
• Operating condition: 0 ~ 5000m above sea level,0 ~ 95%RH and -10～50℃,respectively,Max. wind velocity of 15m/s
• Power supply: AC 100-240V with AC adapter;inner Li-battery(8000mAH)
• Dimensions: 150mm(L) x150mm (W) x150mm (H)
• Weight : 2.7 Kg excluding battery,3.2 Kg including battery

Functions